Alumni

Mehrzad Sharifian

Residual stress simulation and redistribution under heat exposure

Mohsen Mokhtabad Amrei

Materials Characterization, Metallography, Welding, Manufacturing Processes, Additive Manufacturing

David Langlais

Characterization of powders used in the metal injection molding (MIM) process

Strain field measurement - Quantitative microstructural analysis

Damien Texier

Micromechanical behavior of heterogeneous materials, graded materials and thin products

Malo Jullien

Identifying the impact of additive manufacturing processes and feedstocks on fatigue properties

Luiz Aun Fonseca

Inner-Diameter High-Velocity Oxy-Fuel coating (ID-HVOF)

Mahmoud Bayazid

Microstructural and Mechanical Characterization of Ti Alloy Parts Produced by Additive Manufacturing Using the LPBF Process

Dorian Delbergue

Development of the binder-based additive manufacturing of aluminum - Numerical simulation of the powder injection molding process

Julien Milanese

Effect of powder reuse on the properties of LPBF manufactured parts

Quentin Boyadjian

Machine Learning for Micrographic Analysis (CNN) & Crystallographic Texture of Aluminum Alloys

Pierre Maurel

Surface nanostructuration assisted by severe plastic deformation with ultrasonic shot peening on aluminium and titanium at room and cryogenic temperature

Ahad Shafiee

Additive manufacturing, Alloy design, Casting, Severe Plastic Deformation

Mohamed Iben-Houria

Damage modelling under water impact erosion of titanium alloy Ti-6Al-4V.

Hamid Javadi

The influence of machined surface characteristics on the fatigue behavior of Inconel718

Machining of aeronautical materials and mechanical behaviour of laser welding joints

Sébastien Le Corre

Microstructure and texture optimisation of titanium air foil to improve the liquid impegment erosion behaviour

Cellular automaton and crystallin plasticity

Moeling of shot peening process at the crystal scale

Liquid impingement erosion modelling

Etude de l'effet de la microstructure sur les propriétés de fatigue-dwell de l'alliage de titane

Mohammad Pourdavood

Microstructure-sensitive modeling of short fatigue crack behavior in polycrystalline materials

Farzaneh Vali Ghazvini

Study of fatigue crack initiation mechanisms Al cast/forged by DIC technique

Fatigue properties optimization by heat-assisted surface mechanical attrition treatment

In-service microstructural evolution of MCrAlY coatings and their influences on the mechanical properties of coated blades

Hamed Mirabi

Developing Wire arc additive manufacture of H13 hot work tool steel

Shamim Pourrahimi

Sustainability in Titanium Alloy Additive Manufacturing and Post-Processing – An Electrochemical and Image Processing Approach

Cellular Automaton simulation and analysis of micro-mechanical fields in polycrystals

Seyed Ali Delbari

ASSESSING THE WEATHERING-INDUCED DEGRADATION OF CHEMICALLY STRENGTHENED GLASSES

Pouria Salehi

Numerical simulation of fatigue performance for laser welded AA 6005-T6 joints

Dynamic behavior study of 13Cr-4Ni martensitic sainless steel during crack prpagation.

Alain Youmbi

automatic detection of defects in tatanium alloys

Injection molding of irregular metal powders

Raphaël Côté

Impact of process parameters on the quality of metallic parts produce by material extrusion additive manufacturing of highly filled polymer

Mehrdad Paknejad

Experimental testings and finite element simulations of additively manufactured titanium lattice structures

Loic Villié

Strain heterogeneities effect analysis on the constitutive laws in uniaxial compression

Sarah Ance

Development of binder powder feedstock for the material extrusion additive manufacturing process of highly-filled polymers

Fayaz Foroozmehr

Examining the relationships between microstructure and mechanical properties of 13% Cr-4% Ni martensitic stainless steels

Bertrand Remi

Modelisation of friction stir welding process with experimental validation

Dorian Delbergue

Improvment of the X-ray diffraction technique for residual stress measurement in shot peened parts

Study of local properties on fatigue performance of aluminum alloys laser welded joints

induction hardening of 4340 steel

Faranak Nazemi

Identify and quantify the thermodynamics and kinetics aspects of fast tempering in martensite low-alloy medium carbon steel used for aerospace application

Marc Novelli

Characterization of the deformation microstructure generated after ultrasonique shot peening on austenitic stainless steels

Remy Bretin

Développement d'un modèle analytique considérant les effets de voisinages dans les polycristaux

Mohamed Khaled Trigui

Metal powder 3D printing

Development of MEX 3D printing for the manufacture of aluminum parts

Valentin Obrier

Metal powder mapping

Théo Villeneuve

Correlation of cutting force signals in machining with tool condition and part quality

DEVELOPMENT OF A POWDER-BINDER FEEDSTOCK FOR 3D PRINTING

Effect of surface finish change on fatigue performance of additively manufactured titanium parts

Abdelberi Chandoul

Additive manufacturing by extrusion of material Highly Filled with aluminum powder

Metrological analysis of parts produced by MEX 3D printing

Remanufacturing of engineering glass into high value-added components

Corn drying

Benoît Beaulieu

Caracterization of MEX's inherent contour defects effets on low cycle fatigue performances

Development of tools for variations predicting in the injection of manufactured parts by powder injection molding for the aerospace industry

Riad Rouabah

Development of a new Powder-Binder Mixture for 3D Printing

Development of a powder-binder mixture for 3D printing

MIM - Green shrink characterization

Defining coating characteristics within the experimental domain imposed by ID-HVOF

Development of prediction tools for low pressure injection molding

Foad Haghniaz

Mold filling behavior of LPIM feedstocks using numerical simulations and real-scale injections

Numerical simulation of debinding of parts manufactured by low pressure metal powder injection molding

Statistical analysis of defects found in multilayer welded joints of hydraulic turbines

David Langlais

Study of the feedstocks used in the metal injection molding of superalloys

Clement Pot

Prediction of the mechanical properties of extruded aluminium profiles

Numerical simulation and experimental characterization of the injection phase of low-pressure injection moldin

Billy Guy

Aluminum extrusion modeling

Seyed Mohammad Majdi

Effect of Powder Shape and Size on the Properties of Low-Viscosity Iron-Based Feedstock Used in Low- Pressure Powder Injection Molding

Aziz Bentrad

Étude expérimentale et numérique de la mouillabilité des mélanges poudre-liant pour LPIM

Optimization the low pressure injections molding of Inconel metal powders for manufacture aeronautical parts.

Microstructural and mechanical characterization of fswed joint between AA2024 and AA2198

Ultrasonic testing of brazed joints

Ali Kehal

RHEOLOGICAL STUDY OF ALUMINIUM-BASED MIXTURES DEVELOPED FOR MEAM-HP

Titanium Alloys characterization with Convolutive Neuron Networks (CNN)

Machining of aluminum and minimization of residual stresses / Out-of-plane residual stresses in mild steels

Timothé Caudron

Anisotropy of Ti-6Al-4V at 1% deformation with 2 different PSD

Clément Dru

Simulation of heating and quenching of simple-shaped parts under different induction heating conditions

Accuratly measuring LPBF Titanium pieces

Anisotropy of aluminum according to the deformation path

Correlation between ultrasound and micro/macrostructure of titanium

Simulation, deformation, recrystallization of aluminum

Thibault Cisey

Fatigue characterization and optimization of an AlSi10Mg aluminum alloy

Metrologic analysis of MIM parts

Maïa Djoroukhian

Simulation of inclusions and porosity by cellular automaton

Théo Francisco

Mechanical characterization of additive manufacturing titanium alloy parts

Édouard Guilmot

Searching and testing an ideal mixture of powders and binders for an aluminum alloy from its preparation to its 3D printing and debinding

Design of 3D printer with metallic powder

Establishment of a database by numerical simulation of the compression of viscoplastic material.

The study of residual stresses in anisotropic materials

Erwan Marchand

Mecanichal

Recrystallization Behavior of As-Extruded AA6082 in Hot- and Cold-Rolled conditions under Different Annealing Times at 400 °C

Florian Perrin

Precision electrochemical micromachining process for difficult-to-machine materials

Marius Sigaud

Macrozone simulation using cellular automaton

Loïs Tixier

Characterization of anisotropy of extruded aluminium profiles

Maëlys Tronche

Metallographic study of sintered MEX parts

Victor Damay

Additive Manufacturing MEX

Bassel El Garaihy

EBSD characterization of a Wire Arc Additive Manufacturing-built Bimetallic High-Strength Low-Alloy Steel/Si-Bronze Functionally Graded Material

Improvement of Bond Strength for Stainless Steel/Aluminum Alloys by Surface Processing

Tamaki Ito

Elucidation of Dissimilar Material Joining Phenomena on Steel and Aluminum Alloy using Hot-wire Laser Brazing

The Investigation of the Effects of Different Parameters on the Life of Adhesively Bonded Joints

Alexis Julia

Milling of Inconel 718 superalloy and its effect on fatigue life

Characterizing the anisotropy of extruded aluminum profiles

Thomas Belforti

Analysis of the evolution of textures and mechanical properties of aluminum alloys on extruded profiles

Jacob Bernier

Development of a powder-binder mixture for 3D printers

Analysis of anisotropy at the microstructure scale using digital image correlation and crystal orientation measurement

Achille Durin Couval

Mechanical and chemical characterization of aluminum samples manufactured by 3D printing with non-standard powder compositions.

Amaury Gabriel

Evolution of crystal microstructures and mechanical anisotropy of rolled and partially recrystallized 6000 series aluminum alloys

Characterization of properties and microstructure of WCCoCr coatings produced by HVOF (High Velocity Oxy Fuel)

Baibhav Kumar

Fraisage du superalliage Inconel 718 et son effet sur la tenue à la fatigue

Chiara Martinello

3D printing of aluminium alloys

Henevith Mendez

Study of the cathodic disbondment of an epoxy coating reinforced with ZnO nanocontainers on Steel A36 in NaCl (3.5%)

Enzo Mongeau

Effect of powder reuse strategies on the mechanical performance of parts manufactured by additive manufacturing

Effect of powder reusing on the fatigue properties of as-built LPBF Ti-6Al-4V alloy : Influence of defect geometry and local microstructure.

Characterization of the anisotropy of aluminum alloys

Characterization of parts made of titanium 5553 by additive manufacturing

Modeling and implementation of carbides in 316L

Julien Vermorel

Calculation of stresses generated by the shape of defects produced in additive manufacturing using new numerical methods.

Imad Beriah

Study of the effect of reusability and recycling of Titanium powders on the mechanical behaviour of additive manufactured parts

Oscar Bohórquez Becerra

Mathematical model for electric arc welding process selection based on static and dynamic characteristics.

Elucidation of Dissimilar Material Joining Phenomena On Steel and Aluminum Alloy using Hot-wire Laser Brazing

Alvin Kissoondoyal

Improvement of fatigue performances of hammered stainless steel welded joints

Alexis Lamy

Characterization and optimization of the Cold Spray process by plasma surface treatment on samples of aluminium 6061

Jonathan Larmat

Engineer internship in mechanical characterization

Effects of microstructural characteristics of Aluminum Laser-welded joint on its mechanical properties.

Improvement of Navarro and De Los Rios model of short cracks propagation in Inconel 718 super-alloy

James William Tcheumanak

Design of a micro-machine of traction under controlled atmosphere

Denis Mutel

Short crack propagation in Inconel 718

Short fatigue crack propagation behavior of a Nickel-base superalloy, IN718, machined by turning process