Faculty Members
Philippe Bocher
- SEM
- Macro Mechanical Tests
- Micro Mechanical Tests
- Titanium
- Aluminium
- Steel
- Superalloy
- Welding
- Brazing
- Induction
- Modelisation - Cellular Automaton
- Residual Stresses Measurements
- EBSD
- Chemical Analysis
Improvement of the properties of manufactured parts through the integration of different manufacturing processes
Vincent Demers
- SEM
- Macro Mechanical Tests
- Steel
- Superalloy
- Welding
- Brazing
- Powder Metallurgy
- Rheology
- Injection of powders
- Debinding
- Sintering
Powder metallurgy, Powder injection molding, Rheology, Caracterization, Debinding, Sintering
Lucas Hof
- SEM
- Image Analysis
- Macro Mechanical Tests
- Surface Preparation
- DSC/TGA
- Design
- Caracterization
- Matlab
- Micro-machining
- Electrochemical characterization
- Electrochemical machining
- Electrochemical manufacturing
- Recycling and remanufacturing
- Circular manufacturing
- Manufacturing system
- Intelligent manufacturing
- Industry 4.0
- Ceramics (crystalline/amorphous)
Smart and Circular Manufacturing Systems and Processes
Alena Kreitcberg
- Macro Mechanical Tests
- Micro Mechanical Tests
- Titanium
- Superalloy
- Modelisation - ANSYS
- EBSD
- DSC/TGA
- Caracterization
- SEM
- Thermodynamic modeling
- Microstructures
- Metal composites
- Function gradient materials
- High-temperature mechanical testing
- Additive manufacturing process modeling
- Additive manufacturing
Metal Matrix Composites and Functionally Graded Materials
Elmira Moosavi
- SEM
- Steel
- Chemical Analysis
- DSC/TGA
- Python
- Recycling and remanufacturing
- Intelligent manufacturing
- Ceramics (crystalline/amorphous)
Thermodynamic Modeling and Simulation of High-Temperature Materials Behavior and Fabrication Processes
Communications
Aude Ségur
- Internal Communication
- External Communication
- Communication and branding strategy
- Administrative Support
- Project management
- Content writing
Communications and Administration Project Manager
Research Staff
Mohamed Ibrahim
- SEM
- Image Analysis
- Macro Mechanical Tests
- Micro Mechanical Tests
- Surface Preparation
- Aluminium
- Steel
- Superalloy
- Welding
- Residual Stresses Measurements
- Microhardness
- Chemical Analysis
- Powder Metallurgy
- Injection of powders
- Design
- Caracterization
Fatigue characteristics for automotive applications
Yasser Zedan
- SEM
- Image Analysis
- Macro Mechanical Tests
- Micro Mechanical Tests
- Surface Preparation
- Titanium
- Aluminium
- Steel
- Superalloy
- Welding
- Brazing
- Residual Stresses Measurements
- Microhardness
- EBSD
- Chemical Analysis
Aeronautics Joint Characterization
Postdoctoral Researchers
Yann Austernaud
- Macro Mechanical Tests
- Titanium
- Residual Stresses Measurements
- EBSD
- Powder Metallurgy
- Caracterization
- SEM
- Microstructures
Characterization of the mechanical properties of parts produced using LPBF additive manufacturing
Remy Bretin
- Modelisation - ABAQUS
- Modelisation - Cellular Automaton
Neighborhood effect within polycrystals stress fields
Gabriel Marcil-St-Onge
- SEM
- Image Analysis
- Surface Preparation
- Aluminium
- Powder Metallurgy
- Rheology
- Injection of powders
- Debinding
- Sintering
- DSC/TGA
- Caracterization
- Matlab
- Image J
Binder-Based Additive Manufacturing
Julien Moreau
- Powder Metallurgy
- Debinding
- Sintering
- Caracterization
- Additive manufacturing
- Heat treatment
Addictive manufacturing of superalloys for aerospace applications
Jagannadh V S N Sripada
- SEM
- Micro Mechanical Tests
- Surface Preparation
- Aluminium
- Microhardness
- EBSD
- Powder Metallurgy
- DSC/TGA
- Caracterization
- Content writing
- Python
- Image J
- Latex
Additive manufacturing of reinforcements on aluminum profiles by laser-assisted cold spraying
PhD
Abbas Ahmadi Siahboumi
- SEM
- Image Analysis
- Macro Mechanical Tests
- Micro Mechanical Tests
- Surface Preparation
- Titanium
- Steel
- Superalloy
- DSC/TGA
- Ceramics (crystalline/amorphous)
- Oxides
- Thermodynamic modeling
Coupled thermodynamic modeling and experimental study of antimony oxide-containing metallurgical systems
Jesús Arias Hernández
- SEM
- Image Analysis
- Modelisation - COMSOL
- Modelisation - ANSYS
- Microhardness
- Powder Metallurgy
- Python
- Image J
- Recycling and remanufacturing
- Ceramics (crystalline/amorphous)
- SEM
- Oxides
- Artificial intelligence
- Thermodynamic modeling
Microwave assisted metallugy
Benoît Beaulieu
- Image Analysis
- Macro Mechanical Tests
- Micro Mechanical Tests
- Steel
- Welding
- Brazing
- Modelisation - ANSYS
- Powder Metallurgy
- Design
- Matlab
- Python
- VBA Excel
- C++
- Intelligent manufacturing
- Industry 4.0
- Artificial intelligence
Impact of Surface Geometry on the Fatigue Performance of Dense Metallic Parts Produced by Additive Manufacturing via Material Extrusion
Douglas Cole
- SEM
- Image Analysis
- Modelisation - COMSOL
- Rheology
- Design
- Project management
- Micro-machining
- Circular manufacturing
- Manufacturing system
- Industry 4.0
- Ceramics (crystalline/amorphous)
Antonio D'Andrea
- Image Analysis
- Surface Preparation
- Steel
Determining the probability of failure stochastically combining a probabilistic Kitagawa diagram, local defect population and other variables
Pirooz Dibayan
- SEM
- Image Analysis
- Macro Mechanical Tests
- Surface Preparation
- Aluminium
- EBSD
Study on the hot deformation behavior of cast AA6082 aluminum alloy with different microstructures as well as the heterogenous nature of grain and texture structures which are developed during hot forging process
Gabin Dutrievoz
- Steel
- Welding
- Modelisation - ANSYS
- Matlab
- Python
- Latex
- Thermodynamic modeling
- Systus
- Sysweld
Development of a numerical simulation to represent the hydrodynamics and thermics of the melt during laser beam welding and additive manufacturing
Jean-Baptiste Godefroy
- Image Analysis
- Python
- Latex
Microstructural and texture analysis using artificial neural networks
Siavash Neishaboury
- Image Analysis
- Welding
- Image J
Probability of welding defect occurrence In Martensitic stainless steel of turbine blade and the effect of defect distribution on fatigue properties of turbine blade.
Clément Pot
- Image Analysis
- Macro Mechanical Tests
- Micro Mechanical Tests
- Surface Preparation
- Aluminium
- EBSD
- Design
- Caracterization
- Administrative Support
- Project management
- Content writing
- Python
Predicton of the mechanical properties of aluminium extruded components by using deep neural networks
Saleh Rasouli Jouryabi
- SEM
- Image Analysis
- Macro Mechanical Tests
- Micro Mechanical Tests
- Surface Preparation
- Aluminium
- Steel
- Welding
- Brazing
- Chemical Analysis
- Powder Metallurgy
- DSC/TGA
- Image J
- Latex
- Ceramics (crystalline/amorphous)
- Oxides
- Thermodynamic modeling
Coupled thermodynamic modeling and experimental study of the In2O3- and GeO2-containing systems
Guillaume Villeneuve
- Design
- Matlab
- Python
- VBA Excel
- Latex
- Micro-machining
- Electrochemical machining
- Electrochemical manufacturing
- Ceramics (crystalline/amorphous)
Development of a thermochemical machining process for hadifficult-to machine materials
Majid Yazdani
- SEM
- Macro Mechanical Tests
- Micro Mechanical Tests
- Surface Preparation
- Aluminium
- Steel
- Welding
- Microhardness
- EBSD
- Caracterization
Extrusion of aluminum alloy
Master’s (memory)
Thomas Beaudry-Lagacé
- Superalloy
- Brazing
- Rheology
- DSC/TGA
- Caracterization
- Opération de fournaises
- Densité tapée
Characterization and evaluation of the impact of different surface preparation methods on furnace brazing of superalloys.
Mathias Bollinger
- Micro Mechanical Tests
- Titanium
- Powder Metallurgy
Characterization of new titanium powders for additive manufacturing
Antoine Clément
Metrologic analysis of MIM parts
Wafaa Erraoui
- Steel
- Superalloy
- Powder Metallurgy
- Design
- Caracterization
- Project management
- VBA Excel
- C++
- Manufacturing system
Léo Gandoin
- Brazing
- Modelisation - ABAQUS
- Design
- Caracterization
- Recycling and remanufacturing
- Metrology
Optimize the brazing process by evaluating the impact of surface preparation steps
Alex Hébert
- Superalloy
- Caracterization
- Matlab
Development of Laser Drilling Process for Aerospace Parts
Timon Jacquemin
- Macro Mechanical Tests
- Surface Preparation
- Caracterization
- Ceramics (crystalline/amorphous)
Improving the performance of surfaces produced by the HVOF process for aerospace applications
Tom Jaulin
- Macro Mechanical Tests
- Steel
- Induction
- Residual Stresses Measurements
- Project management
- Content writing
- Python
Fatigue study of transmission rolling elements that underwent quenching after surface heating by induction
Noufel Khelfellah
- Modelisation - ABAQUS
- Design
- Project management
- Matlab
- VBA Excel
- 3D modeling
- Metrology
Additive manufacturing of powder-binder mixtures and polymers (3D printing) by material extrusion
Nadia Lahouache
- Image Analysis
- Powder Metallurgy
- Sintering
- Caracterization
- Microstructures
Metallographic characterization of parts produced by sintering
Luna Legrand
- Macro Mechanical Tests
- Micro Mechanical Tests
- Aluminium
- Superalloy
- Residual Stresses Measurements
- Microhardness
Application of aluminum alloy deposits by laser-assisted cold spraying
Amine Ouamri
- Steel
- Chemical Analysis
- Rheology
- Python
- R
- Latex
Mapping the influence of polymeric binders on the rheological properties and injectability of LPIM mixtures
Phillipe Renaud
- Image Analysis
- Superalloy
- Caracterization
- Image J
- Latex
Development of laser drilling process for aerospace parts
Hachem Zammali
- Macro Mechanical Tests
- Titanium
- Aluminium
- Steel
- Superalloy
- Modelisation - ANSYS
- Modelisation - ABAQUS
- Powder Metallurgy
- Injection of powders
- Design
- Caracterization
- Matlab
Development of mixtures for MEX 3D printing
Internships
Aïda Faye
Louis Garcia
- Powder Metallurgy
- Debinding
- Sintering
- Additive manufacturing process modeling
- Additive manufacturing
Printing, debinding and sintering of MEX parts
Sacha Jarny
- Induction
- Residual Stresses Measurements
- Microhardness
- Fatigue
Fatigue, induction, mesures de contraintes résiduelles, microdureté
Alexandre Le Sager
- Image Analysis
- Residual Stresses Measurements
- Metrology
Residual stress measurements on machined parts under various machining conditions. Study of the effects of stress gradients within the component on measurement quality.
Bruno Henrique Oliveira De Lima
- Residual Stresses Measurements
- Project management
- Additive manufacturing
- Fatigue
Hétérogénéité et instabilité des contraintes résiduelles
Thomas Pédron
- Image Analysis
- Titanium
- Steel
- Matlab
- 3D modeling
- Microstructures
- Additive manufacturing
- Fatigue
Effect of Microstructure on the Hazardousness of Porosities and Inclusions on Fatigue Behavior
Cristian Zahir Reyes Sanchez
William Zamudio-Turcotte
- Design
- 3D modeling
- Metrology
MEX 3D printer development